Chapter3 Setup Mode; Wi-Fi Setup - Wansview Q5 User Manual

Chapter3 Setup Mode

3.1 Wi-Fi Setup

Note:
The camera can only support 2.4Ghz Wi-Fi, it doesn't support 5Ghz Wi-Fi.
1
① Place the camera near the router within 3 feet and power on the camera with the attached
power cord. Make your phone use the 2.4G Wi-Fi.
② Tap 【Add Device】 on the APP, and choose the camera model Q5 or Q6. 2
③ Check if the camera's indicator light is flashing red and blue, if yes, tap【Flashing】. 3
0 6