Kernau KFD 9603 User Manual page 65

PROBLEM
The programme has been
interrupted for no reason.
Clothes have shrunk, felted
or deteriorated.
Water leaking from the
loading door.
The loading door opens on
its own.
The water tank warning
symbol is on/flashing.
The filter cleaning warning
symbol is on.
The heat exchanger
cleaning warning symbol
is on.
REASON
The loading door might not be
closed properly.
There might have been a power
failure.
The water tank might be full.
The programme used might not be
suitable for the type of laundry.
There might be lint accumulated on
the inner surfaces of the loading door
and on the surfaces of the gasket of
the loading door.
The loading door might not be
closed properly.
The water tank might be full.
The water discharge hose might be
bent.
The lint filter might be unclean.
The filter seat might be clogged by
lint.
There might be a layer that causes
obstruction on the surface of the lint
filter.
The heat exchanger might be
unclean.
SOLUTION
Make sure that the loading door is
properly closed.
Press the Start/Pause key to start the
programme.
Empty the water tank.
Check the care labels on the laundry
items, select a suitable programme for
the type of laundry.
Clean the inner surfaces of the loading
door and the surfaces of the gasket of
the loading door.
Push the loading door until you hear
the closing sound.
Empty the water tank.
If the product is connected directly
to the water outlet, check the water
discharge hose.
Clean the filter.
Clean the filter seat.
Wash the filter with lukewarm water.
Clean the heat exchanger.
EN 65