Connection To Water Outlet; Connecting The Water Discharge Hose - Kernau KFD 9603 User Manual

1.6. Connection to Water Outlet (with optional drain hose)
In products with a heat pump unit, water accumulates in the water tank during the drying
process. You must empty the accumulated water after each drying process. Instead of
periodically emptying the water tank, you can also use the water drain hose provided
with the product to directly drain the water outside.

1.6.1. Connecting the Water Discharge Hose

1. Pull and take out the end of the hose at the back of the dryer. Do not use any tools
to take out the hose.
2. Fit one end of the water discharge hose, which is provided with the product, to the
slot from which you have removed the hose.
3. Fix the other end of the water discharge hose directly to the water outlet or sink.
2
ATTENTION: The hose must be connected in a manner that it cannot be displaced.
If the hose comes out during water discharge, there might be flooding in
your house.
IMPORTANT: The water discharge house must be installed at a height of 80 cm
maximum.
IMPORTANT: The water discharge hose must not be bent between the outlet and
the product, folded or stepped over.
1
3
EN 48 39 47