Driver Installation - YDLIDAR X4 Lidar User Manual

2.2 Driver Installation

To evaluate and develop the X4 under Windows, you need to install the serial port
driver of the USB adapter board. The USB adapter board of this kit adopts CP2102 chip to
realize serial port (UART) to USB signal conversion. Its driver can be downloaded from our
official website or downloaded from the official website of Silicon Labs.
https://www.ydlidar.com/dowfile.html?id=97
http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
After decompressing the driver package, run the CP2102's Windows driver installation
file (exe file under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit
version (x64) installation program according to the version of the windows operating
system.
Double-click the exe file and follow the prompts to install it.
Copyright 2015-2021 EAI
FIG 4 YDLIDAR X4 AUXILIARY POWER SUPPLY
FIG 5 YDLIDAR X4 DRIVER VERSION SELECTION
Development
Platform
5V Power
Supply
3 / 14