Driver Installation - YDLIDAR X4PRO User Manual

2.2 Driver Installation

To evaluate and develop the X4PRO under Windows, the serial port driver of the USB adapter
board needed to be installed. The USB adapter board of this kit adopts CP2102 chip to realize serial
port (UART) to USB signal conversion. Its driver can be downloaded from our official website or
downloaded from the official website of Silicon Labs.
https://www.ydlidar.com/dowfile.html?id=97
http://cn.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
After decompressing the driver package, run the CP2102's Windows driver installation file (exe
file under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version (x64)
installation program according to the version of the windows operating system.
Double-click the exe file and follow the prompts to install it.
After the installation is complete, right-click on [My Computer] and select [Properties]. On the
open [System] screen, select [Device Manager] from the left menu to access the [Device Manager].
Copyright 2022 EAI All Rights Reserved
FIG 5 YDLIDAR X4PRO DRIVER VERSION SELECTION
FIG 6 YDLIDAR X4PRO DRIVER INSTALLING
3 / 13