Power Supply - YDLIDAR X4 Lidar User Manual
Hide thumbs
Also See for X4 Lidar:
- User manual (12 pages) ,
- User manual (14 pages) ,
- User manual (15 pages)
Table of Contents
Advertisement
4.3 Power Supply
During the development process, since the drive current of the USB interface of each
platform or the USB interface of the computer may be too low to drive the X4, the external
power supply of the +5V to the X4 needs to be provided through the USB_PWR interface of
the USB interface board. It is not recommended to use mobile phone power bank because
the voltage ripple of power bank is too large.
13 / 14
Copyright 2015-2021 EAI
Advertisement
Table of Contents
