Advertisement
Maintenance
Lubrication
Before connecting the hose, apply 4 to 5 drops of spindle oil to the air inlet. Using thicker oil can cause
poor performance or malfunction. If thicker oil is accidentally used, wash it off immediately. In addition,
oiling is required every 3–4 hours of operation.
Storage
Do not store the device in a place with high humidity. If the tool is stored immediately after use, resid -
ual moisture inside the tool can lead to rust formation. Before storage and after operation, oil the tool
at the air inlet with spindle oil and operate it briefly.
© by WilTec Wildanger Technik GmbH
Item 61900
Page 7
http://www.WilTec.de
http://www.aoyue.eu
03
2021-1
http://www.teichtip.de
Advertisement
