Troubleshooting - Bond 52010 Owner's Manual

TROUBLESHOOTING

Problem
Burner won't light with
a match
Heating unit emits a lot of
black smoke
Flame blows out
easily
Cause
No gas flow
Regulator isn't connected securely to the
tank
Spider webs or insect nest in the burner
and guard
Burner ports are clogged
Flame is obstructed at burner ports
High or gusting winds
No gas flow
Solution
Check if gas cylinder is empty
Tighten regulator connection to the gas
tank
Check the burner and guard
Turn all gas flow connections off. Insert
an opened paperclip (or similar item) into
each of the burner ports to clear them
out.
Check that all burner ports are free of
any small lava rocks/pumice stones/
LavaGlass pieces
®
Increase flame to 'high'
Check if gas cylinder is empty
1-866-771-2663 | Page 11