Page 1
HPS250 High-Current Powered Subwoofer Technical Manual Technical Manual INFINITY SYSTEMS INC. 250 Crossways Park Drive Woodbury, New York 11797 A Harman International Company Part No.: 1112-HPS250 1/99...
9. High Level Inputs - These High Level Inputs are for 4. LED - This LED turns green when the HPS250 is receivers that do not have line-level “pre-amp out” receiving power (is turned on) and is receiving a or “subwoofer out”...
Powered Subwoofer HPS-250 DISASSEMBLY PROCEDURES Amplifier Removal Woofer Removal Lay the subwoofer on its side on a padded surface, DO NOT ATTEMPT TO PRY THE GRILLE (#10) OUT amplifier facing upwards. OF ITS RECESS. Locate and remove the (2) Allen head screws (#2) at Lay the subwoofer on its side on a padded surface.
Powered Subwoofer HPS-250 TEST PROCEDURE 2 (Note: A high gain amplifier of at least a 100 watt rating is recommended for this test) General Function UUT = Unit Under Test Connect both right and left line level inputs (RCA) to signal generator and UUT. Use Y-cable if necessary from mono source.
Need help?
Do you have a question about the HPS250 and is the answer not in the manual?
Questions and answers