Time2 MIP11 Quick Start Manual

Wireless surveillance camera

Hide thumbs Also See for MIP11:

Quick Start Guide

For a detailed User Manual and setup video, please go to www.time2technology.com

1. Setting up your Time2 MIP11 Wireless Surveillance Camera

a) Connect the Camera to a power supply

1. Insert the power adapter plug into the port at the back of the camera

2. Connect the other end of the power adapter to a suitable mains power socket

b) Connect the Camera to your wireless internet router

1. Insert one end of the Ethernet (Internet) cable into a port on your wireless router

2. Connect the other end to the port at the back of the camera

c) Go to

www.time2technology.com

d) Connect and view the camera by entering the Username

and Password at the back of the unit

to download and install the IP Camera software onto your computer

Table of Contents

Need help?

Do you have a question about the MIP11 and is the answer not in the manual?

Page 1 Quick Start Guide For a detailed User Manual and setup video, please go to www.time2technology.com 1. Setting up your Time2 MIP11 Wireless Surveillance Camera a) Connect the Camera to a power supply 1. Insert the power adapter plug into the port at the back of the camera 2.
Page 2 2. Customer Support If you are experiencing any issues with your Time2 MIP11 Surveillance Camera, please visit the help section on our website...