4. Remove the screws (×5
5. Remove the molding props (×9
6. Remove the P-Board.
Note:
When assembling the P-Board, the position of each hole of
the insulation sheets (A and B) is set to the position of each
hole of the P-Board, then assemble them. (
indicate setting positions.)
).
).
marks
TH-50PV700AZ / TH-50PV700H / TH-50PV700M / TH-50PV700MR
6.6.
Remove the PA-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (PA3, PA4, PA6 and PA7).
3. Remove the screws (×3
11
) and remove the PA-Board.