6.11. Remove the SU-Board
1. Remove the screws (×3
2. Remove the flexible cables (SU1, SU2, SU3 and SU4)
connected to the SU-Board and remove the connector
(SC45-SU45).
3. Slide the SU-Board to the left to disconnect from a
connector (SC41-SU41) on the SC-Board and remove the
SU-Board.
6.12. Remove the SD-Board
1. Remove the screws (×3
2. Remove the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board and remove the connector
(SC46-SD46).
3. Slide the SD-Board to the left to disconnect from a
connector (SC42-SD42) on the SC-Board and remove the
SD-Board.
).
).
TH-50PV700AZ / TH-50PV700H / TH-50PV700M / TH-50PV700MR
6.13. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 6.11.
and 6.12.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×9
13
) and remove the SC-Board.