ABB Relion SAM600-IO Operation Manual page 54

Section 7
Operating procedures
IEC17000108 V1 EN-US
Figure 36:
6.
To browse the function blocks, scroll the list with
Function blocks available depend on the application configuration. To move back to the list,
press
7.
To select a function block, press
IEC17000109 V1 EN-US
Figure 37:
The # character on the right indicates that the parameter belongs to a setting group.
8.
To browse the settings, scroll the list with
9.
To edit the selected setting, press
•
•
48
Selecting the function category
.
Function block settings
In case of a parameter that is not part of a setting group, the parameter is activated for
editing.
In case of a setting group parameter, the editing dialog shows the value of the setting in
all available setting groups, but the user can edit only the value in the selected setting
group. The active setting group is marked with an asterisk *.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC17000108-1-en.vsd
and .
.
IEC17000109-1-en.vsd
and .
.
1MRK 500 131-UEN Rev. C
Switchgear control unit SAM600-IO
Operation manual