Turning The Display Backlight On; Identifying The Device - ABB Relion SAM600-IO Operation Manual

Section 5
Using the HMI
1.
Press
2.
To confirm logoff, select Yes and press
IEC12000159-3-en.vsd
IEC12000159 V3 EN-US
Figure 14:
•
5.1.4

Turning the display backlight on

The display backlight is normally off. It turns on at power up.
• To turn on the backlight manually, press any LHMI push button.
The backlight turns on and the panel is ready for further operations.
If the panel has not been used for a predefined timeout period, the backlight is switched off. The user
is logged out from the current user level after the display backlight has turned off. The factory default
for display timeout is 10 minutes. The minimum is 1 minute.
The display returns to the default view and all unconfirmed operations, for example parameter editing
and breaker selection are cancelled.
5.1.5

Identifying the device

The IED information includes detailed information about the device, such as revision and serial
number.
1. Select Main menu /Diagnostics /IED Status /Product identifiers .
2.
Select a submenu with
28
.
Logging off
To cancel logoff, press
Change the backlight timeout period in Main menu /Configuration /HMI /Screen /
SCREEN:1 /DisplayTimeout .
and
© 2017 - 2021 Hitachi Power Grids. All rights reserved
.
.
.
1MRK 500 131-UEN Rev. C
AMU0600409 v9
AMU0600422 v9
Switchgear control unit SAM600-IO
Operation manual