Clearing And Acknowledging; Using The Local Hmi Help - ABB Relion SAM600-IO Operation Manual

1MRK 500 131-UEN Rev. C
5.1.11

Clearing and acknowledging

The Clear button is used to reset, acknowledge or clear all messages and indications, including
LEDs and latched outputs as well as registers and recordings. Press the Clear button to activate a
selection menu, and select the wanted clearance or reset function. Events and alarms assigned to
alarm LEDs are cleared with the Clear button as well.
1.
Press
IEC17000246 V1 EN-US
Figure 24:
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4. Repeat steps 2 and 3 to clear other items.
5.1.12

Using the local HMI help

1.
Press
2.
Scroll the text with
3.
To close the help, press
The help dialog is also closed when the display timeout expires.
Switchgear control unit SAM600-IO
Operation manual
After changing the parameters marked with !, the IED restarts automatically for the
changes to take effect.
to activate the Clear view.
Clear view
, select OK to confirm the selection or Cancel to cancel the selection, and press
to open the help view.
or if the help text exceeds the display area.
.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC17000246-1-en.vsd
or .
Section 5
Using the HMI
AMU0600425 v10
.
AMU0600421 v8
35