Logging On - ABB Relion SAM600-IO Operation Manual

Section 5
Using the HMI
IEC15000064 V1 EN-US
5.1.2

Logging on

1.
Press
The login is also activated when attempting a password-protected operation.
2.
Press
If CAM is activated an on-screen keyboard is shown.
3. Type in the user name using the on-screen keyboard.
You can end user name editing at any time by pressing
navigate to the OK button and press
press
If CAM is not activated select the user by scrolling with
IEC12000161 V3 EN-US
Figure 9:
4.
Select OK on the on-screen keyboard and press
5.
Press
An on-screen keyboard is shown.
Each added character is shown for a short time, then hidden with an asterisk character '*' to
enhance security. You can end password editing at any time by pressing
password field is focused (or navigate to the OK button and press
press
When the cursor is moved, the newly selected character is shown for a short time.
IEC15000061 V2 EN-US
6. Type in the password using the on-screen keyboard.
26
to activate the login procedure.
to activate the User field.
) to abort the login attempt.
IEC12000161-3-en.vsd
Selecting the user name
to select the Password field and press
(or navigate to the Cancel button and press
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC15000064.vsdx
while the user field is focused (or
), or press (or navigate to the Cancel button and
and
to stop editing the user name.
to activate it.
) to abort the login attempt.
IEC150000 61-2-en.vsdx
1MRK 500 131-UEN Rev. C
GUID-E0F937A9-78EC-4528-AB34-FD6EC79A7815 v5
, and press to confirm.
while the
) to attempt to login, or
Switchgear control unit SAM600-IO
Operation manual