Subscribe to Our Youtube Channel
Related Manuals for 1byone Belt Drive
Summary of Contents for 1byone Belt Drive
- Page 1 Belt Drive Turntable System 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byonebros.com Instruction Manual Made in China...
-
Page 2: Important Safety Instructions
Introduction Thank you for purchasing 1byone Belt Drive Turntable System. This instruction manual contains important information about safety, usage and disposal. Use the product as described and keep this manual for future reference. If you sell this turntable or pass it on, also give this manual to the new owner. -
Page 3: Product Description
Product Description This turntable is supplied with a factory-fitted cartridge that’s already adjusted. Note: Instructions provided in this manual for adjusting the cartridge are provided in 1. Counterweight case the cartridge is replaced at a later date by a different model. 2. - Page 4 5. Carefully rotate the Counterweight until the tonearm achieves a neutral, level 3. Remove the red ribbon from the belt. balance. The tonearm should return to this balanced position if it is moved up or down. Perform this adjustment carefully. Counterweight Tonearm 4.
-
Page 5: Anti-Skating Force Adjustment
Anti-skating Force Adjustment NOTE: If your amplifier does not have an input suitable for phono cartridges, you will need to purchase a separate phono amplifier for moving magnetic cartridges. The anti-skating force must be adjusted corresponding to the tracking force as follows: This separate phono amplifier will then connect between your turntable and your Tracking Force Groove in the stub... - Page 6 7. Position the tonearm over the desired location (groove) on the record. Audacity and USB Connection Audacity supports Windows95 / Window XP / Window 7 / Vista or more advanced 8. Move the tonearm lift lever to the down position to move the tonearm toward the record.
- Page 7 2.3) Set your preferences as desired 2.4) Adjust the output and input volume Output Volume Input Volume 2.5) Press the Record button and the left and right tracks will appear on the interface Note: Check your computer’s audio properties and make sure “SSS USB Audio Device”...
- Page 8 3. Export the Music Files to Your Preferred Format 3) After opened, it will come to the following menu, click “YES” to go to “Llame_enc.dll”, and find the file’s location. • Once you have finished recording, you should save your music to the computer. •...
-
Page 9: Maintenance And Cleaning
Maintenance and Cleaning Installing a New Replacement Stylus 1. Grasp both sides of the stylus holder and insert the stylus grip into the rear tab of NOTE: Disconnect the power cable plug from the outlet as a precaution before the cartridge. maintenance. -
Page 10: Technical Specifications
7. Tighten the screws completely once the perfect alignment is achieved. There is no power: NOTE: If you are unfamiliar or uncomfortable with completing this procedure, we - The turntable is not connected to the power adapter. recommend consulting with a professional to perform the installation. - No power at the outlet. - Page 11 This product’s packaging is made from environmentally friendly material GERMANY/FRANCE and can be disposed of at your local recycling plant. Email: euhelp@1byonebros.com ITALY/SPAIN BRAND OWNER 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byonebros.com...
Need help?
Do you have a question about the Belt Drive and is the answer not in the manual?
Questions and answers