Advertisement
Table of Contents
- 1 Safety Instructions
- 2 Product Description
- 3 Anti-Skating Force Adjustment
- 4 Main Power Connection
- 5 Power Management Function
- 6 Playing a Record
- 7 Bluetooth Operation
- 8 Replacing the Stylus
- 9 Replacing the Belt
- 10 When the Turntable Is Moved
- 11 Troubleshooting
- 12 Specifications
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for 1byone Audio-Technica AT3600L
Summary of Contents for 1byone Audio-Technica AT3600L
- Page 1 Turntable Hi-Fi System with Speakers 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 Instruction Manual www.1byonebros.com...
-
Page 2: Safety Instructions
Introduction Thank you for purchasing 1byone Turntable Hi-Fi System with Speakers. This instruction manual contains important information about safety, usage and disposal. Use the product as described and keep this manual for future reference. If you sell this turntable or pass it on, also give this manual to the new owner. -
Page 3: Product Description
Product Description 11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings. 12. Unplug the product during lightning storms or when unused for long periods of time. - Page 4 3. Place the slip mat on top of the platter. Installing the Lid Make sure the 1byone logo on the mat Figure 2 is facing up (Figure 2). Insert the hinge pockets of the lid onto the hinges of...
- Page 5 Cartridge Tracking Force Adjustment 6. Once the tonearm is correctly balanced, return the tonearm to its rest. Hold the Counterweight without moving it, and gently rotate the tracking force dial until the The Counterweight supplied is suitable zero is in line with black center line on the rear of the tonearm. Check to make sure Counterweight for cartridges weighing between 3.0-6.0g.
-
Page 6: Anti-Skating Force Adjustment
Anti-skating Force Adjustment 2. Connection to External Speaker with the RCA Audio Cable If you wish to use your own amplifier or speakers, please follow the instructions The anti-skating force must be adjusted corresponding to the tracking force as follows: below: Tracking Force Groove in the Stick... -
Page 7: Main Power Connection
2.2 Connecting the device Main Power Connection Align the settings for the pre-amplifier selector switch and connect the 1. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the back of the RCA audio cable to an input jack that is compatible with the connectable turntable. -
Page 8: Bluetooth Operation
Turntable mode and blue indicator light indicates Bluetooth mode. 3. Turn on the Bluetooth feature of your media device and search for and select “1byone BS017” to pair the media device and turntable. 2.4 Place the record on the slip mat. If using 45RPM records, put the 45RPM adapter on the center spindle before placing the record on 4. - Page 9 2.2 System settings needed for Windows and Mac 2.5 Devices Use Device Toolbar to set the recording and playback devices and to set the Windows: recording channels to "2 (Stereo) Recording Channels", as in the below example on 1. By the system clock, right-click over the Speaker icon select Sounds then Windows 10: the Recording tab, and then click on the USB device in the list and click Properties.
-
Page 10: Replacing The Stylus
• Try to aim for a maximum peak of around –6 dB, which corresponds to Replacing the Stylus around 0.5 on the waveform. You can always boost the level later with Effect It's suggested to replace the stylus after 400 hours of use. >... -
Page 11: Replacing The Belt
Replacing the Belt 4. Place the main platter back onto the sub-platter. • The belt is a consumable part. Replace the belt if the speed of playback slows down or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a year. -
Page 12: Troubleshooting
Troubleshooting The stylus skips. • Is the record warped? -Check the record. Problem Solution • Is the record scratched? The platter does • Is the AC adapter connected to the outlet? not spin. -Check the record. -Connect the AC adapter to the outlet. There is howling. -
Page 13: Specifications
Dimensions (L x W x H) closed), 16.34” x 16.34” x 16.34” (415 x 415 x 415mm) (lid open) Weight 20.9lb (9.5kg) Stylus Model Audio-Technica AT3600L Frequency Response 20Hz - 20kHz Channel Balance <2.5dB Channel Separation >18dB Output Voltage 2.5mV... - Page 14 Customer Service/Kundenservice Service Clients/Atención al cliente/Assistenza Clienti To ensure speedy handling of your issue, Pour vous assurez une assistance rapide please call or email us for assistance. en cas de problème, veuillez envoyer un e-mail. Phone: +1 909-391-3888 Email: euhelp@1byonebros.com (Mon-Fri 9:00am - 5:00pm PST) Email: ushelp@1byonebros.com Para garantizar una rápida atención de su...
Need help?
Do you have a question about the Audio-Technica AT3600L and is the answer not in the manual?
Questions and answers