Front Direction Indicators; Rear Optical Unit - VESPA GTS 250 i.e. Manual

Front direction indicators (03_33)

To replace the front turn indicator bulbs, remove the tail light taking out the retaining
screw "A", remove the bulb holder from its fitting; gently turn the bulb around 30º and
remove it. Follow the process in reverse order to refit.
03_33

Rear optical unit (03_34)

Remove screw «A» to remove the rear headlight assembly.
Access to taillight bulbs, stop light bulb and license plate bulb.
To reassemble, repeat the operation but in reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.
03_34
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.
58