Running In; Starting Up The Engine - VESPA GTS 250 i.e. Manual

Hide thumbs Also See for GTS 250 i.e.:
Table of Contents

Advertisement

Running in (02_05)

WARNING
DURING THE FIRST 1000 KM DO NOT RIDE THE VEHICLE OVER 80% OF ITS
MAXIMUM SPEED. AVOID TWISTING THE THROTTLE GRIP FULLY OR KEEP-
ING A CONSTANT SPEED ALONG LONG SECTIONS OF ROAD. AFTER THE
FIRST 1000 KM, GRADUALLY INCREASE SPEED UNTIL REACHING THE MAX-
IMUM PERFORMANCE.
02_05

Starting up the engine (02_06, 02_07)

To start the engine it is necessary, before pressing the starter button, to pull and keep
pulled the front or rear brake lever, which activates the appropriate switch allowing
start-up.
1. Rest the vehicle on its centre stand, ensuring the rear wheel is not touching the
ground.
2. Maintain the throttle grip «E» completely untwisted.
3. Insert the key into the ignition switch «A» and turn it to «ON».
02_06
4. Make sure that switch «B» "0-1" is set to "1".
5. Pull lever «C» of the front or rear brake and then activate the starter button «D».
WARNING
THE AUTOMATIC TRANSMISSION MAKES THE REAR WHEEL TURN EVEN
WHEN THE THROTTLE GRIP IS SLIGHTLY TWISTED. RELEASE THE BRAKE
CAREFULLY AFTER STARTING, AND THEN ACCELERATE GRADUALLY.
28

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents