Immobilizer Device Enabled Indicator Led; Operation - VESPA GTS 250 i.e. Manual

Hide thumbs Also See for GTS 250 i.e.:
Table of Contents

Advertisement

Immobilizer device enabled indicator led (01_13)

Activation of the "PIAGGIO IMMOBILIZER" system is signalled by a flashing «A»
indicator. In order to reduce battery discharge, the indicator LED turns off automatically
after 48 hours of uninterrupted functioning. Should the system fail, different LED flash-
ing patterns will provide the Authorised Service Centre with information on the type
of fault detected.
01_13

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety
system activates the immobilizer system. Turning the key to "ON" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "OFF" and then to "ON"; if the lock
cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot
be started, contact an Authorised Piaggio Service Centre, which is provided with
the electronic equipment required to detect and repair the system.
When additional keys are required, please note that data storage (up to 7 keys max.)
must be done on all keys, both new and existing ones.
Take your scooter to an Authorised Piaggio Service Centre carrying with you the
red-handgrip key and all the blue keys in your possession.
The codes of keys not submitted for the new programming procedure are deleted from
the memory. Any lost keys will therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents