Table Of Contents; Inflating The Bottom; Inflating The Side Tubes - Decathlon Kayak Itiwit X100 2P Manual

Itiwit 3+: ref 8486041
Itiwit 2+: ref 8511866
Congratulations, you have just purchased an ITIWIT kayak. Our team is proud to offer you a quality product. Reading this manual carefully will help you to use your
product properly.
1. Instructions for use - Preparing the kayak

1.1 Inflating the bottom

1.2 Inflating the side tubes

1.3 Inflating the seats
1.4 Positioning the seats
1.5 Fins
2. Care, packing away and storage
2.1 Maintenance after use
2.2 Drying
2.3 Folding
2.4 Storage
3. Repair
3.1 Pressure loss
3.2Spare parts (After Sales Service)
1.INSTRUCTIONS FOR USE - PREPARING THE KAYAK
• Lay the kayak flat on a clean surface, with no objects which could damage the inflatable structure.
1.1 Inflating the bottom
• Locate the high-pressure valve required to inflate the bottom
Make sure the valves are in the closed position.
Open position (*1): the spring is depressed, the valve is open, the air escapes, the kayak deflates.
Closed position (*2): the spring is released, the valve is closed, connect the end of the pump to inflate.
• Insert the bottom inside the kayak and strap it to the ends.
The bottom valve must be aligned with the side tube valves located at the rear of the kayak. The positioning of the bottom must allow free access to the drain plugs
located in the middle of the kayak.
• Connect the ITIWIT pump (sold separately) using the pump tip ¼ turn (*3) and inflate the bottom to 5 PSI. Finish by screwing the cap.
1.2 Inflating the side tubes
• Locate the high-pressure valve required to inflate the side tubes.
Make sure the valves are in the closed position.
Open position (*1): the spring is depressed, the valve is open, the air escapes, the kayak deflates.
Closed position (*2): the spring is released, the valve is closed, connect the end of the pump to inflate.
• Connect the ITIWIT pump (sold separately) using the pump tip ¼ turn (*3) and inflate the bottom to 3 PSI. Finish by screwing the cap.
INSTRUCTIONS
Each side tube is equipped with a pressure relief valve (*4). Its role is to evacuate excess air related to over-inflation. During this action, a whistling sound may be
heard. This whistling is normal; it can occur during inflation or prolonged exposure to the sun. It will stop when the pressure inside the kayak is optimal.
USER GUIDE - ITIWIT X100 + KAYAKS
p.12