Chicago Pneumatic 2H410-350-ATEX Safety Information Manual page 3

Air motors
Technical Data
Technical data
Air flow at max. output (l/s)
Air flow at max. output (cfm) 36
Free speed (rpm)
Max. output Power (kW)
Max. output Power (hp)
Max. working pressure (bar) 6
Max. working pressure (psi) 87
Speed at max. output (rpm)
Torque at max. output (Nm) 51
Torque at max. output (ft.lb) 37.6
Weight (kg)
Weight (lb)
Inlet hose size (mm)
Inlet hose size (in)
Declarations
EU DECLARATION OF CONFORMITY
We, CHICAGO PNEUMATIC Tool Co. LLC, 1815 Club-
house Road, Rock Hill, SC 29730 - USA, declare under our
sole responsibility that the product (with name, type and se-
rial number, see front page) is in conformity with the follow-
ing Directive(s):
2006/42/EC (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7), 2014/34/EU
Harmonized standards applied:
DIN EN 4414:2010, DIN EN 1127-1:2011, DIN EN
80079-36:2016, DIN EN 80079-37:2016, DIN EN ISO
12100:2010
The relevant technical documentation was compiled in accor-
dance with Machinery Directive 2006/42/EC and ATEX Di-
rective 2014/34/EU. Authorities can request the technical file
for ATEX Directive 2014/34/EU from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain, 09/12/2019
Pascal ROUSSY
Signature of issuer
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
17
350
0.66
0.85
350
1.7
3.7
12
0.5
www.P65Warnings.ca.gov
© Chicago Pneumatic - 6159927960
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
product.
Failure to follow all instructions listed below may result
in electric shock, fire, property damage and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.
Intended Use
This motor is designed to be incorporated into a fixed or
moving machine. It is either for right hand rotation only, left
hand rotation only, or reversible rotation and should be
mounted by the flange or threaded nose only, as appropriate.
No other use permitted.
The risk of motors being the source of ignition of a poten-
tially explosive atmosphere is extremely small. The user is
responsible for assessing the risks associated with the whole
machine into which the motor is to be incorporated.
Product Specific Instructions
Warning
Make sure you are familiar with the operating instructions
before you use this motor.
This motor, its attachments and accessories must only be
used for the purpose for which they were designed.
For product liability and safety reasons any modification to
the motor or its accessories, which may have an influence on
the product liability, must be agreed upon by the technical
authority of the manufacturer.
To prevent personal injury and long term risks:
• If the motor is ATEX-certified, filter/silencers must be
installed at the motor outlet ports.
Silencers are recommended also for other applications to
reduce noise exposure.
Safety Information
3