Dispense Valve And Sprayhead - Bunn Single SH BrewWISE DBC Illustrated Parts Catalog

ITEM PART NO.
1 26846.0000
26846.0001
26846.0002
2 23254.0000
3 22305.0000
22305.0003
22305.0002
4 23256.0000
5 - - - - - - - -
6 - - - - - - - -
7 23255.0000
8 - - - - - - - -
9 26924.0000
10 20976.0006*
35052.0000*
11 12422.0001
12422.0008
12 21136.0001
34956.0001
13 01075.0000
14 01082.0000
01082.0002
35308.1000
15 34868.0000
16 35070.0001
17 34867.0004
18 11517.0008
19 20976.1000
20976.1001
20976.1002
20 35052.1000
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.

DISPENSE VALVE AND SPRAYHEAD

QTY. DESCRIPTION
1 Valve Assy, Sprayhead, 120V (Includes items 2 thru 8)
1 Valve Assy, Sprayhead, 200V (Includes items 2 thru 8)
1 Valve Assy, Sprayhead, 230V (Includes items 2 thru 8)
4 Screw #8 - 32
1 Coil Assy, Dispensing Valve, 120V
1 Coil Assy, Dispensing Valve, 200V
1 Coil Assy, Dispensing Valve, 230V
1 Spacer Plate
1 Spring (Not available order item 18)
1 Plunger (Not available order item 18)
1 Diaphragm
1 Body (Not available order item 1)
1 Tee, Run .25" MPTF x .38" x .38" Barb (Early model Tank only)
1 Tube, Silicone .38" I.D. x 4.50" (Order item 19) (Early model Tank)
1 Tube, Silicone .75" I.D. x 6.25" (Order item 20) (Late model Tank)
2 Clamp, Hose .59"/.66" I. D. (Early model Tank)
2 Clamp, Hose .93"/1.1" I. D. (Late model Tank)
1 Fitting, Barb .375" x .25" MPT (Early model Tank)
1 Fitting, .25" MPT .281" I.D. (Late model Tank)
1 Nut, Hex .438" - 20
1 Sprayhead 6 Hole (6-078) (Optional)
1 Sprayhead 6 Hole (6-098)
2 Sprayhead Assy, 17 Hole (Includes one each of items 15 - 17)
2 Seal, Sprayhead
2 Sprayhead Back
2 Sprayhead
- Valve Repair Kit (Includes one each of items 5, 6 & 7)
- Tube, Silicone .375" I.D. x 12.0"
- Tube, Silicone .375" I.D. x 36.0"
- Tube, Silicone .375" I.D. x 120.0"
- Tube, Silicone .75" X 12.0"
19
Not illustrated
34024 090607