Table of Contents
Advertisement
The EASTWOOD 12" & 24" PAN AND BOX BRAKES are precision engineered metal working tools designed to produce accurate, variable length bends in
angles up to 135° in mild, 20 gauge sheet steel and 18 gauge aluminum in widths up to 12" for the 20664 and 24" for 20665". Create complex shapes such
as floor reinforcement channels and ribs, sections of corrugated pickup bed floors; truck bedside panels, inner fender structures and much more, all with one
convenient bench-mounted tool.
TOOLS REQUIRED
• 6mm Hex Key
• 2.5mm Hex Key
• 16mm Wrench
• 17mm Wrench
• Small/Medium Phillips Screwdriver
• Feeler Gauge Set
• Angle Gauge or Protractor
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using this machine.
• Save for future reference.
• The Eastwood Pan and Box Brake consists of heavy metal components which can present a hand/finger pinch hazard and cause
potentially serious injuries if dropped. Avoid pinching hands while handling. The use of safety shoes is strongly recommended. Keep
fingers and hands away from moving parts when operating.
• Handling sharp metal can cause serious cuts. Wear thick, well-fitting work gloves to prevent cuts from handling sharp metal.
• Metal particles can be ejected from the metal surface when bending. Sheet metal edges and corners are sharp and can injure eyes.
Always wear ANSI approved eye protection when operating this tool.
2
PINCH AND CRUSH HAZARD!
CUT HAZARD!
EYE INJURY HAZARD!
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
Table of Contents
