Advertisement
STEP 1: Insert the protruding parts on the Seat (H) and Back into the Left Side (D) and Right Side (E).
Attach the Seat, Back and Top Bar (F) to the Left Side and Right Side using the
90mm Screws (A). Tighten all Screws using the Allen Wrench (C).
(A)
STEP 2: Lightly tap the Screw Plugs (B) into the Left Side (D) and Right Side (E) using a rubber mallet.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(F)
(D)
(D)
(G)
(H)
(E)
(E)
(B)
Page 3 of 4
Advertisement
