Treatment Session - TensCare QALM User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 97
4) Remove the clear plastic liner
from the rear of the device. Be
careful to ensure the gel pads
remain stuck to the device.
5) Place the clear plastic liner
back in the travel case. The
yellow liner can be disposed of.
6) Place the device in the centre
of your forehead, roughly 1 cm
above the eyebrows.
The gel pads are reusable.
However, over time they will
become less adhesive. When
this happens remove the gel
pads currently on the device
and apply new gel pad.
A fabric headband is included
with your QALM device. This is
provided for your convenience
and can be used to help keep
the device held firmly in place,
but its use is optional.
Note: The number of
applications for each
gel
depending on the user's skin
condition.
Note: Gel pads are for
single patient use.
Warning:
QALM is switched OFF
before applying and
removing the device.

6.3. TREATMENT SESSION

1) Press and hold the ON/OFF
button on the device for 1
second to switch the unit on.
110
pad
will
vary
Ensure
that

Advertisement

Table of Contents
loading

Table of Contents