Setting Up And Using Qalm; Charging The Battery - TensCare QALM User Manual

maximum intensity of 20mA is
sufficient to have a therapeutic
effect, even if you feel like this
intensity has become tolerated.
INTENSITY LEDS
The unit has 40 levels of strength.
The strength
indicated by the three LEDs on
the bottom of the device. Each
LED gets brighter as the intensity
increases. The minimum and
maximum intensities
follows:
Minimum intensity – one dim LED
Maximum intensity – three bright
LEDS
6. SETTING UP AND
USING QALM
6.1. CHARGING THE
BATTERY
QALM is powered by a built-in
rechargeable Li-ion battery. A
separate charging cable with
universal USB plug is included in
the kit.
level will be
are as
When the battery is low, the
central LED will flash white. This
would start about 4 hours before
the battery is empty (4 hours on
stand-by).
Warning: Use only the
charging cable
supplied. Use of other
chargers could be hazardous
and will negate the warranty.
To charge the battery:
Connect the USB cable to a
mobile
charging socket or PC USB port.
Whilst the battery is charging,
the central LED light will flash
white slowly and repeatedly.
The device
approximately 2-2.5 hours to
charge.
When the
charged, the white LED light will
stop flashing and remain turned
on.
Note: To minimise the
reduction
capacity the device
should be recharged yearly,
regardless of usage.
107
phone or
will
battery
in
tablet
take
is fully
battery