Table of Contents
Advertisement
TEST - ADVANCED ONLY
The VRF II Series provides a means for self-test using the magnetic FOB provided with the unit. When the unit
is not in alarm, place and hold the FOB over the "TEST" label on the cover. If the unit is functioning properly, the
unit will alarm according to the selected fail-safe mode as shown below. When the test is completed and results
verified, simply move the FOB away from the unit.
HIGH FAIL-SAFE:
• Main relay de-energizes
• Red ALARM LED is on
LOW FAIL-SAFE
• Main relay energizes
• Red ALARM LED is off
Figure 13: Magnetic FOB
18
18
www.bindicator.com
VRF180913 Rev. A
Advertisement
Table of Contents
