Danfoss 060R9769 Instructions

Instructions
Application
KPU temperature controls are used for regulation and to ensure
safety in refrigeration, freezing, air conditioning, ventilating and
heating systems.
KPU temperature controls are available with vapor charge or with
adsorption charge.
All KPU temperature controls are fi tted with Single-Pole Double-
Throw (SPDT) switches.
Product Specifi cation
Charge Type
KPU 61
KPU 61
KPU 61
KPU 61B
KPU 61B
Vapor
KPU 61
KPU 62
KPU 63
KPU 63
KPU 68
KPU 69
KPU 62
KPU 73
KPU 73
KPU 73B
KPU 73
KPU 71
Adsorption
KPU 71B
KPU 74
KPU 74B
KPU 75
KPU 75
KPU 77
* man.(MIN): Manual reset after cut-out on falling temperature
** The switch diff erential is dependent on range settings. Low range settings increases the diff erential. High range settings decreases the
diff erential. Use the graphs on page 3 to determine the correct diff erential setting.
Thermostat bulb types
A
straight capillary tube
Refrigeration and Air Conditioning Controls
KPU Temperature Controls
Code no. Bulb type tube length
060L5201 A
060L5202 A
060L5203 B
060L5204 B
060L5205 B
060L5210 B
060L5206 C1
060L5213 A
060L5214 B
060L5215 C1
060L5217 B
060L5207 C2
060L5208 E3
060L5209 E1
060L5211 E3
060L5212 D
060L5218 E2
060L5216 E2
060L5219 E1
060L5220 E1
060L5221 F
060L5222 E2
060L5223 E3
B C
remote air coil air coil/ room sensor
For large ac motors and for all dc motors, KPU is installed in the
control circuit. For single phase ac motors, KPU is installed in the
line voltage supply to the motor.
The standard KPU enclosure is rated NEMA 1. NEMA 2 is obtained
when the control is mounted on a fl at surface. When mounting
KPU on a bracket, cover all unused holes.
Capillary Regulating
Reset
range
function
[in.]
–20 → 60
80 auto.
–20 → 60
200 auto.
–20 → 60
80 auto.
–20 → 60
80 man. (MIN)*
–20 → 60
200 man. (MIN)*
–20 → 60
80 auto.
–20 → 60
0 auto.
–60 → 15
80 auto.
–60 → 15
80 auto.
25 → 95
0 auto.
25 → 95
80 auto.
–20 → 60
0 auto.
–15 → 60
80 auto.
–15 → 60
80 auto.
–15 → 60
80 man. (MIN)*
–15 → 60
80 auto.
25 → 70
80 auto.
25 → 70
80 man. (MIN)*
0 → 80
80 auto.
0 → 80
80 man. (MIN)*
30 → 95
80 auto.
30 → 95
80 auto.
60 → 140
80 auto.
D
double contact remote coil
Diff erential Max. bulb
Δt temperature
[F˚] [°F] [°F]
4 → 18**
4 → 18**
4 → 18**
5 (fi xed)**
5 (fi xed)**
4 → 18**
250
4 → 18**
10 → 25**
10 → 25**
5 → 22**
5 → 22**
4 → 15
5 → 35
15 → 45
6 (fi xed)
5 → 35
175
5 → 18
5 (fi xed)
9 → 35
10 (fi xed)
5 → 18
230
5 → 18
6 → 18
265
E
remote bulb
Ambient
temperature
[°F]
–40→122
(170 for max.
2 hours)
F
remote duct coil
DKRCCPICD0A122