Advertisement
Quick Links
Installation & Wiring Instructions
FIG.1.
FIG.2.
FIG.4.
T models
Timer
Adjustment.
+
I
MODEL
F100 (1,2,3)
F100S (1,2,3)
F100T (1,2,3)
F100TS (1,2,3)
F100HS (1,2,3)
F150 (1,2,3)
F150S (1,2,3)
F150T (1,2,3)
F150TS (1,2,3)
F150HS (1,2,3)
100mm/150mm SLIM LINE FAN
VOLTAGE
FREQUENCY
V
Hz
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
220-240
50
FIG.3.
FIG.5.
H models
Humidity
Adjustment
.
POWER
IP
W
16
IP44
16
IP44
16
IP44
16
IP44
16
IP44
16
IPX4
16
IPX4
16
IPX4
16
IPX4
16
IPX4
1
To activate the timer function remove jumper JP1
(If fitted). Once removed the fan will run on for a
fixed period of approx. 15 mins
+
I
T
Advertisement
Related Manuals for Manrose SLIM F100
Summary of Contents for Manrose SLIM F100
- Page 1 100mm/150mm SLIM LINE FAN Installation & Wiring Instructions FIG.1. FIG.2. FIG.3. To activate the timer function remove jumper JP1 (If fitted). Once removed the fan will run on for a fixed period of approx. 15 mins FIG.4. FIG.5. H models T models Humidity Timer...
- Page 2 READ INSTRUCTIONS IN CONJUNCTION WITH THE ILLUSTRATIONS SAFETY AND GUIDANCE NOTES A. All wiring to be in accordance with the current I.E.E. Regulations, or the appropriate standards of your country and MUST be installed by a suitably qualified person. B. The fan should be provided with a local isolator switch capable of disconnecting all poles, having a contact separation of at least 3mm.
- Page 3 DESCRIPTION The 100mm fan is an axial extraction fan suitable for domestic bathrooms and W.C’s. The 150mm fan is an axial extraction fan suitable for domestic kitchens and utility rooms. They are available as wall or panel mounted models with shutter timer and humidity combinations. Complies with the requirements of European Directives 2006/95/EC (LVD), 89/336/EEC (EMC) FAN LOCATION A short circuit of the airflow should always be avoided, Fig.1.
- Page 4 TIMER ADJUSTMENT BEFORE ADJUSTING THE TIMER, SWITCH OFF THE MAINS SUPPLY. TIMER SHOULD ONLY BE ADJUSTED BEFORE OR DURING INSTALLATION. 1. Remove the fan grille. The controller is factory set at 15 minutes approx. The overrun time period can be adjusted from 5-25 minutes by altering the adjuster on the control PCB.