DELTA LOGIC ACCON-MPI-Modem 56k User Manual page 17

Setting the region code wit TeleService
Go to the tab »Modem«.
Add »+GCI=xx« to the Init string, »xx« stands for the region code from
the table in chapter »8«.
Figure 7: Set initialization string
The complete initialization string could look like the following:
AT+GCI=FD;E1L1M1Q0V1&C1S0=1
AT
&F
E1
L1
M1
Q0
V1
&C1
S0=1
ACCON-MPI-Modem 56k
Initiate modem commands
Load modem factory defaults
Echo of commands ON
Sound volume level 1
Speaker ON
Modem response ON
Response in plain text
DCD signal shows available carrier
Automatic call acceptance. The number 1 stands
for rings until call acceptance e.g. S0=3 the
modem accepts the call after 3 rings.
17