Bunn Dual Illustrated Parts Catalog page 41

ITEM PART NO.
1 02618.1000
02806.0000
22089.0000
01347.0000
2 20201.4300
3 00669.0000
4 01382.0003
00973.0000
01382.0002
5 - - - - - - - -
27657.0000
6 12274.0002
7 06335.1000
06335.1002
01327.0000
8 12517.0002
00764.0000
9 01570.0000
10 12984.0002
12984.0004
11 04243.0000
12 12246.0000
02338.0000
13 02753.0000
02754.0000
28305.0000
14 02628.0000
28303.0001
15 05789.0000
28304.0000
16 20969.0001*
28302.0000
20969.0004*
17 01309.0000
18 23004.0000
39248.0000
02308.0000
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
ELECTRICAL CONTROLS AND READY LIGHT
QTY. DESCRIPTION
- Relay, 120V
- Relay, 240V
- Relay, 200V
- Screw, Truss Head 6 - 32 x .375"
- Bracket, Relay
- Plug, Hole (Use as required) (1 used on late models without Interface)
3 Screw, Truss Head 6 - 32 x .375"
3 Nut, Keps 6 - 32
1 Screw, Truss Head BLK 6 - 32 x .375"
1 Dustcap W/Chain (First type. Not available
order second type Dustcap)
1 Dustcap, Socket (Second type)
1 Socket Assy W/Leads, Interface
1 Contactor Assy, 120V Coil
1 Contactor Assy, 200/240V Coil
2 Screw, Pan Head 10 - 32 x .375"
1 Ready Light Replacement Kit (Includes item 9)
1 Plug, Hole .375" (Not Illustrated)
2 Wire Nut, 2 - 24 AWG
2 Light Assy, 120V (Includes 2 of item 11)
2 Light Assy, 240V (Includes 2 of item 11)
4 Terminal Housing, Receptacle
2 Knob, Rotary Switch (Includes Setscrew Indented Below)
2 Setscrew, Locking 8 - 32 x .25"
2 Switch, On/Off 120V
2 Switch, On/Off 240V
2 Switch, On/Off 230V (3 used on 3 Phase Models)
2 Switch, Momentary - Start
2 Switch, Momentary - Start (230V)
1 Switch, Selector (One Grinder Interface Models only)
1 Switch, Selector (230V)
2 Switch Assy, Rotary (120/208 & 120/240V models prior to 09/29/06) (Not
available. Order 39053.1001)
2 Switch Assy, Rotary (230V models and all other models after 09/29/06)
2 Switch Assy, Rotary (DBC models) (Not available. Order 39053.1004)
1 Ground Screw W/Terminal Washer 10 - 32 x .50"
1 Bracket, Terminal Block Mounting
1 Bracket, Terminal Block Mounting (Models with Main Power Switch)
2 Screw, Pan Head 8 - 32 x .375"
(continued)
2 less required on late models
Used With Mechanical Thermostat &
Electronic Control W/Recovery Booster
41
Used with Recovery Booster only -
One each with Electronic Control -
Two each with Mech. Thermostat
Two used with two Grinder
Interface Models
Brewers with Electronic
Control or DBC only
Brewers with Mechanical
Thermostat only
27041 040607