Safety Definitions; General Safety Instructions; Grounded Product Instructions; Symbols On The Product - Husqvarna S 13 Workshop Manual

2.1 Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage to
the product, other materials or the adjacent area
if the instructions in the manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.

2.2 General safety instructions

WARNING: Read the warning instructions that
follow before you use the product.
The service center that repairs the product must have
safety devices that obey local regulations. Warnings and
cautions are used to point out specially important parts
of the workshop manual.

2.3 Grounded product instructions

WARNING: Incorrect connection can result in
electrical shock. Speak to an approved
electrician if you are not sure if the product is
correctly grounded.
Do not do modifications to the power plug from
its factory specification. If the power plug is not
correct for the mains outlet, let an approved
electrician install a correct mains outlet. Obey
local regulations and laws.
If you do not fully understand the instructions
about the grounded product, speak to an
approved electrician.
The product has a grounded power cord and power
plug. Always connect the product to a grounded mains
outlet. This decreases the risk of electrical shock if there
is a malfunction.
Do not use electrical adapters with the product.

2.4 Symbols on the product

Please read the operator's manual
carefully and make sure you understand
the instructions before using the product.
4 - Safety
2 Safety
Always use an approved breathing mask.
Always use approved ear protection.
Always use approved eye protection.

2.5 Safety instructions for maintenance

• Make sure that the ON/OFF switch is in the OFF
position.
• Disconnect the product from the power supply.
• Only use original spare parts.
• Use personal protective equipment.
• Do not use a high-pressure washer to clean the
product. Water can go into the product and do
damage to the electrical system. Use a moist cloth
to clean the product.
• The servicing procedures cause contamination.
Dispose all servicing equipment correctly in plastic
bags after servicing. Refer to local regulations.
1347 - 001 -