Husqvarna S 13 Workshop Manual page 22

4. Remove the manometer tube.
5. Remove the 3 nuts. Remove the motor tube to get
access to the cables.
22 - Repair instructions
6. Cut the cable strip that holds the cables together.
7. Remove the hour meter cables (C) from the ON/OFF
switch (A).
B
H
I
J
K
8. Remove the brown (D) and blue (E) electronic filter
cables from the ON/OFF switch.
9. Remove the power brown (F) and green (G) cables
from the ON/OFF switch.
10. Remove the cables from the electronic filter (B).
11. Remove the electronic filter (B).
CAUTION: Do not remove the ground wires
that are attached to the motor housing
C
A
D
E
G
F
1347 - 001 -