Interface Adaptor - Sony DSRM-E1 Operating Instructions Manual

Interface adaptor

3 CONTROL UNIT
connector
1 LANC connector
Connect this to the video device used
as player, by a LANC cable.
2 POWER switch
When this switch is in the ON
position, the unit is powered on. (The
Video Walkman must also be powered
on.)
1 LANC connector
4 Power indicator
3 CONTROL UNIT connector
Connect this to the supplied controller.
4 Power indicator
This lights when the unit is powered
on.
5 Interface connector
Connect this to the Video Walkman
used as the recorder.
2 POWER switch
5 Interface connector
7 EN