Operation Example: Selecting The Parallel Interface - Brother HL-1660E User Manual
Brother laser printer user's guide hl-1660e
Hide thumbs
Also See for HL-1660E:
- User manual (448 pages) ,
- Parts reference list (25 pages) ,
- Technical reference manual (517 pages)
Advertisement
USER'S GUIDE
4–16
Operation Example: Selecting the Parallel Interface
For this session, select the parallel interface manually as follows:
1. Press the SEL switch to set the printer off-line.
2. Press the MODE switch.
The display shows the first menu.
INTERFACE MODE
3. Press the SET switch.
When you enter the interface mode, the display first shows the current
interface with the asterisk.
I/F=AUTO
4. Press the
or
switch until the desired interface appears on the
display.
I/F=PARALLEL
Display Message
I/F=PARALLEL
I/F=RS-232C
I/F=USB
I/F=OPTION
I/F=AUTO
Note
The optional interface is available only when a commercial MIO
compatible sharing/network card has been installed.
5. Press the SET switch to make the displayed selection effective.
An asterisk appears at the end of the display for a short time. Then the
printer automatically exits from the setting menu to the interface menu.
INTERFACE MODE
*
Interface Mode
Parallel interface
Serial interface
Universal Serial Bus interface
(HL-1660e only)
Optional interface for MIO card
Auto interface selection
Advertisement
