Modular I/O Card - Brother HL-1660E User Manual
Brother laser printer user's guide hl-1660e
Hide thumbs
Also See for HL-1660E:
- User manual (448 pages) ,
- Parts reference list (25 pages) ,
- Technical reference manual (517 pages)
Advertisement
USER'S GUIDE
MODULAR I/O CARD
MIO Interface Slot
5–6
This printer has a modular input/output (MIO) interface slot on the rear
panel. This slot allows you to install a commercial MIO-compatible
sharing/network card.
For more information about MIO cards, consult the dealer where you
purchased this printer.
When you install the MIO card, follow these steps:
1. Turn off the printer and unplug the power cord from the wall socket.
Note
Be sure to turn off the power to the printer before installing or removing
the MIO card.
2. Remove the two screws and cover plate from the MIO interface slot.
3. Unpack the MIO card and hold it on its edge.
Note
Do not touch the card surface. If static electricity collects, it damages the
card.
4. Insert the card until it is securely seated.
5 Secure the MIO card with the two captive screws on the card
6. Retain the cover plate and two screws removed in 2 in case you want
to remove the MIO card later.
Fig. 5-4 Installing the MIO Card
MIO Card
Advertisement
