Brother HL-1660E User Manual page 76

Mode Menu (Continued) Setting Menu
INTERFACE MODE I/F AUTO
(Continued) (Continued)
FORMAT MODE ORIENTATION
(See 4-20.) AUTO MODE
PAGE FORMAT MODE
exit
RESOLUTION MODE RESOLUTION
(See 4-28.) HRC SETTING
exit
PAGE PROTECTION PROTECT=AUTO
(See 4-31.)
CARD OPERATION When the commercial flash memory card or the HDD card has not been formatted:
(HP mode only) FORMAT CARD
(See 4-32.)
exit
Sub-Setting Menu Setting
MIO Setting Available only when a
commercial MIO card has been
installed. The settings available
on the installed MIO card can
appear under the sub-setting
menu.
ORI=PORTRAIT PORTRAIT or LANDSCAPE
AUTO LF=OFF ON ... LF + CR
OFF ... CR only
AUTO CR=OFF ON ... LF, FF, or VT + CR
OFF ... LF, FF, or VT only
AUTO WRAP=OFF ON ... Auto wrap on
OFF ... Auto wrap off
AUTO SKIP=ON
(HP mode) OFF ... No FF at bottom
margin
AUTO MASK=OFF ON ... Auto mask on
(EPSON & IBM modes) OFF ... Auto mask off
exit Exit to AUTO MODE
PAPER =LETTER LETTER, LEGAL, A4, A5,
(For 110/120V model) A6, B5, B6, EXECUTIVE,
PAPER =A4 COM10, MONARCH, C5 and
(For 220/240V model) DL
LEFT M = 0C 0 to 126 columns
RIGHT M = 80C 10 to 136 columns
(Letter, Portrait)
RIGHT M = 78C 10 to 136 columns
(A4, Portrait)
TOP M =0.5" (HP mode) 0, 0.33, 0.5, 1.0, 1.5, or 2.0"
BOTTOM M=0.5" 0, 0.33, 0.5, 1.0, 1.5, or 2.0"
(HP mode)
LINES = 60L 5 to 128 lines/page
(HP, Letter, Portrait)
LINES = 64L 5 to 128 lines/page
(HP, A4, Portrait)
X OFFSET= 0 -500 (left) to +500 (right) dots
Y OFFSET= 0 -500 (down) to +500 (up)
dots
exit Exit to PAGE FORMAT MODE
Exit to FORMAT MODE
RESOLUTION 300 or 600 dpi
HRC=MEDIUM OFF, LIGHT, MEDIUM, or
DARK
Exit to RESOLUTION MODE
AUTO, OFF, LETTER, A4, or
LEGAL
Format the flash memory card or
the HDD card.
Exit to CARD OPERATION
CHAPTER 4 CONTROL PANEL
ON ... Auto FF at bottom
margin
4–9