Balboa MLM990S Quick Reference Manual

EL/GL Series - Mach 3
MLM990S Quick Reference Guide
Jets 1 Jets 2
102 º F
J1
J2
BL
LT
Blower Light
Initial Start-up
When your spa is first actuated, it will go into Priming
mode. Please see the M-7 Installation Instruction Manual
for complete instructions on Power-up and Pump Priming.
The Priming mode will last for up to 4 minutes and
then the spa will begin to heat and maintain the water
temperature in Standard mode. Follow the on screen
instructions. Make your choice, then press Enter (
left alone, the system will resume after 4 minutes. The
Home display screen will then appear after completion.
To Navigate: Use the buttons on the front panel to move
within the menu: Up , Left
Enter ( ) chooses your menu selection.
HT
FC
OZ
Enter
). If
, Right , or Down .
Setting the Time
From the Display Screen, select "Set", then Enter (
Arrow or to select "Time of Day". Enter (
Arrow or to change hour.
Arrow to select minutes. Press
Repeat to change AM/PM. To Save and Exit:
For quick spa temperature set-up. From Home screen,
Arrow Up ; or
Front Panel Buttons and Lights
For instant activation, press Jets 1, Jets 2, Blower, or Light.
The LEDs will light when activated.
Fast Keys Give Quick Access to System Set-up
Fast Keys allows you to quickly view a device and status,
and to turn it on, off, or change modes (Hi/Med/Low).
(See User's Manual: "Fast Keys, to Program".)
From the Home display screen, select
"Fast Keys", then Enter (
represents the four directional keys.
Pressing the designated arrow key will
turn the function to Hi/Med/Low or
On/Off. Press Home (
or to change.
.
to set temperature. to Exit.
Jets 1 L
). The circle
) to exit.
).
).
98°F
Home