TOOLS REQUIRED
Hand Saw
Drill and
1/16" Bit
Phillips Screwdriver
Cut Resistant Gloves
REMOVE PACKAGING
Place Warming Drawer on carton or protective pad to prevent damage to drawer front or finished flooring.
6
Installation Preparation
Safety Glasses
Measuring Tape
Level
MATERIALS REQUIRED (provided)
4 Wood Screws
MATERIALS REQUIRED (not
provided)
2x2 or 2x4
Wood Block
for Anti-Tip
Security
Adhesive or other hardware
for installing runners or shelf to
support warmer drawer
Runners must be level, rigidly mounted and capable
of supporting 150 pounds.
2x2 or 2x4
Lumber for
Runners
31-10700-6