Table Of Contents; Design Information; Models Available - Monogram ZJ7000 Installation Instructions Manual

CONTENTS
Design Information
Models Available .......................................................3
Accessories ...............................................................3
Product Dimensions ..................................................4
Grounding the Appliance ..........................................5
Installation Preparation
Tools and Materials Required ..................................6
Remove Packaging ...................................................6
Installation Options ....................................................7
Installation Below a Countertop ...............................8
Provide Cabinet Support ...........................................9

MODELS AVAILABLE

The warming drawers may be installed directly into a wall or wall oven cabinetry, or below a countertop.
30" Wide Model:
ZW9000
27" Wide Model:
ZJ7000
FRONT PANEL ACCESSORIES
ZXD30B:
This kit provides for the installation of a custom front
panel on 30" models.
NOTE: The original drawer front will be removed and
discarded when this kit is used. The tubular handle
can be reinstalled onto the custom panel with longer
screws (not provided). Or, the original handle can be
replaced with a custom handle of your choice. (Handle
is not supplied.) Choose a custom handle to match or
complement cabinetry hardware.
For more Accessories or purchasing information please refer to Assistance/Accessories section of Monogram
Warming Drawer Owner's Manual.
31-10700-6

Design Information

Installation Instructions
Step 1, Anti-Tip Brackets ..........................................9
Step 2, Install Warming Drawer ................................9
Custom Panel Accessory Kit Installation...........10, 11
Professional Style Panel
Accessory Kit Installation ........................................12
ZXD9030P:
This kit provides for the installation of a stainless steel
professional style door with handle for 30" models.
NOTE: The ZXD9030P professional drawer panel with
handle is a one-piece assembly that replaces the original
drawer front and tubular handle. The original tubular
handle (or a custom handle) cannot be installed onto this
professional drawer panel. This ZXD9030P accessory is
designed to fit 30" warming drawers manufactured after
January 2015.
3