Table of Contents
Advertisement
7-1 Engine Short Block Assembly
Arrow Mark
Scavenging Port Cover
Illustration is the fan side;
starter side is similar.
7. Notice of Reassembly
Cylinder Gasket
7) Cylinder Gasket
When setting the cylinder gasket, make the
arrow mark to the fan side.
8) Scavenging Port Cover
Do not remove the scavenging port cover as
much as possible. If removed the scavenging
port cover, make sure to apply the liquid gasket
to the mating surface with the cylinder and install
the scavenging port cover.
NOTE:
The liquid gasket should be applied
continuously without any gaps to ensure
high sealing accuracy of the mating face of
the scavenging port cover and the cylinder.
Liquid gasket:
Three Bond #1217F or equivalent
Torque: 2.0～3.5N･m (20～35kgf･cm)
-２７-
Advertisement
Table of Contents
