Inserting The Guide Tube - HAMPTON BAY LONGFORD A106003600 Use And Care Manual

Assembly (continued)
14

Inserting the Guide Tube


Insert the Guide tube (J) into the Canopy tubes (L1&L2). Then connect the Guide tube (J) and Guide tube connector (K)
with Post (01) using screws (CC). Then secure the guide tube connect (K) to the post (01) using screw (HH). For easier
installation it is recommended to predrill holes for screw bolt (HH) to make the Guide tube connector (K) level.
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. You may need to slide the canopy back and forth a few times to
ensure it is square.
20
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM