Inflate Sponsons - Feathercraft Klondike Manual

28 INSTALL RUDDER. CONTINUED
• Attach stainless steel rudder cable to sister clips on
rudder delta.
• White rudder haul cord runs up towards side of the cock-
pit. Connect to plastic hook.
29

INFLATE SPONSONS.

• Turn the top of the valve to open. When inflating sponsons,
alternate sides to ensure the frame and skin remain
centered. The air pressure from the sponsons can shift the
frame within the skin. Keep blowing until the skin is nice
and tight. Twist top cap to close. Tuck sponson tubes and
valves out of the cockpit area. Avoid stepping on the hose
and valve, and try to keep the valve free of sand.
Twist valve
Feathercraft
Klondike
35