Roll Out Skin - Feathercraft Klondike Manual

Bow
Note: During additional assembly steps, re-check that the
frame has remained centered in the skin.
10

ROLL OUT SKIN.

Note: rudder bracket is permanently attached to the stern end
of the kayak skin.
• The bow end has the Feathercraft logo.
• Have the velcro tab closures on the inside of the hull
"open" before sliding the frame sections into the skin.
• Slide completed bow and stern frame sections into skin.
• Center the keel bar along the keel strip of the skin.
• Once frame is centered into skin, wrap velcro tabs around
keel tubes.
Stern
Feathercraft
Klondike
18