Device Description - Weber DVH 600 Operating And Maintenance Manual

Device description

The DVH 600 roller is used for compaction work in road building applications.
Drive
The compactor is powered by an air-cooled Kohler diesel engine.
Function
Start the Kohler diesel engine with the attached reversing starter.
The two drums are hydrostatically powered via chains. The chain drive is executed individually
on each bandage. The chain drive also serves as a safety braking system for operating on slopes.
The vibrator that is positioned outside between the two drums is powered via a V-belt.
The hydraulic system consists of a closed circuit with hydraulic pump and hydraulic motor as well
as a hydraulic tank.
The drums are freed of adhering material by the adjustable scrapers.
Operation
Use the gas lever to vary the engine speed between idle and full throttle.
The manual guidance rod is used to steer the roller. All control levers are located on the
manual guidance rod. Direction of travel and speed are controlled with the safety bar (drive bar).
The vibration adjustment lever switches vibration on or off. The arrest lever activates the parking
brake that stops the rear drum.
For safety of the operator a crush guard is attached to the manual guidance rod. If the operator
bumps against the crush guard when moving in reverse, the machine comes to a stop.
9