Table of Contents
Advertisement
Check the hydraulic oil level
Check the hydraulic oil level when the machine is at operating
temperature. The correct oil level is reached when the oil is in
the middle of the view glass.
No hydraulic oil is consumed during operation. If the oil
level drops, you must check the hydraulic system for leaks
Starting
To start, push the vibration lever (1) to the left into the off
position ( ).
Bring the gas lever (2) into full-throttle position.
Slowly tighten the handle (1) of the reversing starter (2) until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position, and
then forcefully and completely pull it through with both hands.
Allow the engine to warm up for a few minutes.
If ambient temperatures are below minus 5 degrees
Celsius comply with the instructions in the operating
manual provided by the engine manufacturer.
1
1
2
1
2
13
Advertisement
Table of Contents
