Operating Fluids And Fill Levels; Troubleshooting - Weber DVH 600 Operating And Maintenance Manual

Operating fluids and fill levels

Assembly
Engine
Engine oil
Fuel tank
Diesel
Hydraulic system
Water tank
Lubricating points

Troubleshooting

Fault
Roller does
not start
Roller does
not move
No vibration
Roller surface
fouled
Operating material
Summer
Quality
SAE 10 W 40
(– 10 ~ + 50 °C)
API – CD CE
or SHPD
or CCMC – D2 – D3 – PD1
Diesel
Diesel in accordance with
DIN 51601-DK
or BS2869-A1 / A2
or ASTM D975-1D / 2D
Hydraulic oil (ISO) H-LP 68
Kinem. visco. 68 mm²/s (cSt) at + 40 °C
First filling:
Fuchs Renolin MR 68MC
Multigrade oil
Clean water
High pressure grease
(lithium saponified),
in accordance with DIN 51502
and 51825
KP2N-30, to 150 °C
First filling:
DEA Paragon EP2, Fuchs Renolit
Duraplex EP2 KKP2P-30
Possible cause
Operating error
Lack of fuel
Fuel filter fouled
Air filter fouled
Operating error
Hydraulic pump is
no longer working
V-belt for the vibration shaft
is defective
Drums are fouled
Winter
Winter diesel fuel
(from approx. – 12 °C) *
Remedy
Execute the start process
as prescribed
Check the fuel level
Change the fuel filter
Clean / change air filter cartridge
Repeat movement attempt
Check the V-belt for the hydraulic
pump; replace if necessary
Change V-belt
Adjust the scraper
DVH
600
1.0 l
4.3 l
6.0 l
33.0 l
as
necessary
27