Maintenance Overview - Weber DVH 600 Operating And Maintenance Manual

Maintenance overview

Maintenance interval
After the first
50 operating hours
Every 8 operating hours /
daily
Every 150 operating hours /
every 6 months
Every 300 operating hours /
every year
Maintenance point Maintenance activity
Hydraulic system
Engine
Air filter
Hydraulic system
Engine
Vibration shaft
Engine
Drive chains
Scraper
Complete roller
Hydraulic system
Water tank +
sprinkling system
Drive
– Change hydraulic oil filter
– Change the engine oil
– Clean air filter insert, check for
damage, replace if necessary
– Check threaded unions, hoses
for leaks, tighten threaded unions
or change hoses as needed
– Only perform work if
the hydraulic system
is depressurized!!
– Checking the engine oil level
– Check V-belt for damage
– Change oil filter and engine oil
– Change the fuel filter
– Lubricate, retighten if necessary
– Visually inspect or readjust
– Check all modules for visible
damage and wear
– Remove fouling, old grease
and rust
– Change hydraulic oil filter
– Change hydraulic oil
– Clean, remove lime scale
– Check drive chains and drive
pinion for wear; retighten as
needed
17